If you’re wondering How to Replace Garage Door Rollers, don’t fret; the process isn’t highly complicated, or You might pay a professional to replace your garage door rollers for hundreds of dollars.
Our lives are made simpler by the garage door, which protects the valuables in our home. The rollers are an essential component that allows the door to slide smoothly in open and closed positions. After a few years of use, you may notice that your garage door makes a dreadful noise every time you open it. As a result, you should replace your garage door rollers based on the amount of use and the quality of the rollers.
Continue reading to learn how to change your rollers fast and efficiently without the help of a specialist.
Why Garage Door Rollers Are Important?
The little wheels that roll along your garage door track are called rollers. They are weight-bearing and sustain the door’s weight as it travels. It’s no surprise that your garage door rollers wear down after all that hard labor.
When the rollers on a garage door get replaced, the homeowner gains significant benefits in preventing irritating, telltale noises every time the door shuts and opens.
Types of Garage Door Rollers
Before wondering how to Replace Garage Door Rollers and their advantages, there are different rollers for you to know. The most popular types are
- Steel: Originally, garage door rollers get comprised of steel with ball bearings integrated into the roller itself. They’re more durable, but they need to get lubricated regularly. They’ll last a lifetime if properly cared for. When this sort of roller becomes loose, it can make obnoxious noises. If they wriggle while rolling, that’s the quickest method to tell if they’re in good shape.
- Plastic Rollers: If you want to save money, go with a plastic roller that has no bearings at all. Only two to three times a year did they need to be lubricated. They are less sturdy and may not last for many years, although they commonly substitute if a more lasting one is unavailable. If the door is dragging excessively or is uneven, it is in desperate need of replacement of these rollers
- Nylon: Nylon garage door rollers are more durable than plastic rollers and are quieter than steel rollers. They are not included in the garage door installation but get frequently recommended when replacing an existing garage door.
Most rollers get constructed of steel; however, just a few manufacturers provide nylon replacements. Plastic rollers are the way to go if you’re searching for a quick fix.
If you are interested: Read Our Easy Guide On How To Bypass Garage Door Sensors.
How to Replace Garage Door Rollers?
With a few tools and a little assistance, you can repair the rollers in your garage on your own. Ladder Pliers and a Flathead Screwdriver are the tools you’ll need.
- New Garage Door Rollers
- Large flat head screwdriver
Step 1: Opening the Garage Door Assembly
If you’re changing the rollers on your garage door, make sure the door is open before you begin. Use pliers to pry open the track towards the front of your garage or a claw hammer to pry it open.
With a pair of pliers, bend one side of the track to an angle. Continue pulling the track open until the part turns, which will let you pop the rollers in and out of the track.
Step 2: Changing the Bottom Rollers
To line the roller with the track, you just pried open, pull the garage door down. Pry the roller out of the track with your screwdriver so you may replace it with a new one by sliding one of your new garage rollers into the hinge’s position. When you get finished, remember to bend the track back into place.
Step 3: Changing Top Rollers
While your garage door is open, climb a ladder to access the top roller. Pull on the round end of the present roller to remove it from the top bracket. After removing the old roller, replace it with the new one.
No screws or nuts will get used to keeping it together. You don’t need to loosen or bend a point in the vertical track as you do with the other rollers. Once the replacement roller has got inserted into the roller bracket, take the track in your hand and turn it.
Note: Before going on to the next hinge and roller, you must replace the removed one. Remember, the door is only held together by the hinges and rollers!
Cost of Replacing a Bad Garage Roller Door
Depending on the material, a set of rollers might cost anywhere from $5 to $35. We recommend nylon rollers since they are higher quality, quieter, and less expensive than steel rollers.
DURA-LIFT Ultra-Life MAX 2” is available for purchase. It features a 25x standard roller bearing capacity for 200,000 door open and close cycles at 190 lb. weight, ensuring maximum durability. Compared to regular steel rollers, it reduces garage door noise by at least 75%.
Garage Door Rollers Maintainance Tips
You’ll need to disable the opener, so you may manually raise and lower the garage door. When the door slides along the tracks, it allows for more straightforward access to the bottom rollers and lubrication distribution.
Lubricate your rollers with lithium or silicone-based lube. To protect your garage floor from oil stains, you may want to lay down a drop cloth or tarp.
How to Replace Garage Door Rollers – Bottom Line
Although garage doors are rarely entirely silent, you may find that the ones in your garage have become quite loud over time. When you consider the benefits of a smooth and quiet operation, replacing outdated garage door rollers is not tricky.
Regular maintenance will save you a lot of time and money by preventing constant wear and tear. Whether you’re still unclear whether you should do it yourself or not, see if you can afford to hire a professional. If you don’t feel secure doing it yourself, it’s not worth it.
How Long Do Garage Door Openers Last? Read here.